How should you answer tender exclusion grounds questions?
You’re working through the supplier questionnaire when a question about a past contract failure stops the bid. The answer needs input from someone who has already finished for the day, and the submission deadline hasn’t moved.
Tender exclusion grounds are worth checking early, because they decide whether you’re allowed to bid at all. A clear, honest answer gives the buyer the facts it needs to make that decision quickly.
What are tender exclusion grounds?
Tender exclusion grounds are the reasons a public buyer can remove a supplier from a tender before anyone looks at the quality of the bid. They cover things like fraud, bribery, unpaid tax, serious problems on a past contract and insolvency. Under the Procurement Act 2023 they sit in two lists: Schedule 6, where the buyer must exclude you, and Schedule 7, where the buyer can choose to.
A past issue on its own won’t rule you out. The buyer looks at whether the problem is still going on or likely to happen again, and that’s where your answer and evidence come in. There’s also a central debarment list, which can rule a supplier out on the same grounds.
In practice, your answer needs to say what happened, who was involved and what has changed since. This guide walks through each of those in the order you’ll need them.
Key takeaways
- Check which legal regime your tender follows before you answer, because older procurements and Scotland have different rules.
- Some tender exclusion grounds mean the buyer must exclude you if the problem is ongoing (Schedule 6), and others leave it to the buyer’s judgement (Schedule 7).
- Your disclosure can cover associated persons, connected persons and intended subcontractors as well as your own organisation.
- A strong answer gives the buyer a clear chronology and evidence of what has changed since.
Which rules and grounds apply to your tender?
Which rules does your tender follow?
Most new public sector tenders in England, Wales and Northern Ireland have followed the Procurement Act 2023 since 24th February 2025. The Cabinet Office’s official exclusions guidance explains how the exclusion rules work under it.
The tender notice or instructions should tell you which rules apply. Make a note of exactly which exclusion questions you’re being asked, so whoever reviews your answer can see what it’s responding to.
Tenders that started under the old rules, such as the Public Contracts Regulations 2015, carry on under those rules. That includes call-offs from older frameworks, so the exclusion questions may look different from a new tender.
Scotland has its own procurement law, including the Public Contracts (Scotland) Regulations 2015. Some healthcare services also follow separate arrangements, such as England’s Provider Selection Regime.
If the tender documents contradict each other on this, ask a clarification question through the portal. Say which parts conflict and how that changes what you need to disclose, and keep the reply with your bid records.
What are the mandatory grounds in Schedule 6?
Schedule 6 lists the mandatory tender exclusion grounds. These include convictions for serious offences such as fraud, bribery, corporate manslaughter or corporate homicide, and terrorism.
Some mandatory grounds don’t need a conviction. These include certain breaches of competition law, tax misconduct and national security concerns, and refusing to cooperate with a debarment investigation can count too.
The Cabinet Office’s competition exclusions guidance explains when competition law comes into it. This can reach ordinary contracting work, as the Competition and Markets Authority (CMA) has fined construction firms for bid-rigging on demolition and asbestos-removal tenders.
If a mandatory ground applies and the buyer thinks the problem is ongoing or likely to happen again, you become an ‘excluded supplier’. In most cases the buyer then has to remove you from the tender.
What are the discretionary grounds in Schedule 7?
Schedule 7 lists the discretionary grounds. These cover insolvency, professional misconduct, some labour and environmental breaches, breach or poor performance on a past contract, and behaving improperly during a tender.
Each of these tender exclusion grounds has its own legal test. A falling-out with a customer, for example, would need to meet the test for breach of contract or poor performance before it counted.
If a discretionary ground applies and the problem is ongoing or likely to happen again, you become an ‘excludable supplier’. The buyer can then choose whether to exclude you, and has to make that decision fairly.
So with Schedule 6 the buyer has to act, and with Schedule 7 it has a choice. In both cases, ticking ‘yes’ is where the buyer’s assessment starts.
How far back can the buyer look?
The Act’s statutory schedules set a five-year limit for most tender exclusion grounds, but the clock starts at different points.
For Schedule 6, the buyer ignores anything that happened more than five years before it makes its decision.
For Schedule 7, the buyer ignores anything it knew about, or reasonably should have known about, more than five years before its decision. That clock starts from when the buyer knew, which may be later than when the event happened. A few Schedule 7 grounds use a three-year limit instead.
Keep a simple timeline for each event: when it happened, the date of any decision or conviction, and when the buyer is likely to have found out. That makes the limits easy to check.
There are also rules for events from before the Act came in. Grounds that are new under the Act, such as corporate manslaughter, generally can’t be based on anything that happened before 24th February 2025.
For grounds that match the old ‘grave professional misconduct’ ground, anything more than three years before 24th February 2025 can’t count.
This matters when the question asks about an older incident. Keep the original event separate from any later conviction or regulator’s decision, because they can have different dates.
The time limits and the length of time a supplier stays on the debarment list are separate things, so keep them apart. If the dates could change whether you’re eligible, get procurement legal advice before you sign the declaration.
Whose conduct do you need to disclose?
Who counts as an associated person?
An associated person is anyone you’re relying on to meet the tender’s conditions of participation, which are the checks on whether you’re able to deliver the contract. A guarantor doesn’t count.
That definition comes from section 26(4) of the Act, and the Cabinet Office’s supplier selection guidance explains it further. A key subcontractor bringing essential technical skills could be one.
Our guidance on tendering with partners and subcontractors helps you describe those delivery relationships consistently.
Who counts as a connected person?
Connected persons include your directors and shadow directors, your parent company, subsidiaries and predecessor companies, and anyone with significant influence or control over your organisation.
A sister company that shares your parent would only be a connected person if it fitted one of the categories in the Act.
Use these definitions when you collect declarations across your group. Ask each company only the questions that apply to it, so the paperwork stays manageable and matches what the buyer asked.
Do you need to check your subcontractors?
Yes. Under section 28, the buyer must ask whether you plan to subcontract and check whether any of your intended subcontractors are on the debarment list.
If the problem sits with an associated person or a subcontractor, the buyer must give you a reasonable chance to replace them before excluding you. The replacement still has to meet the tender’s requirements.
Collect this information while you’re planning the bid. If you do need a replacement, make sure it still fits your delivery model and your price.
How does the debarment list affect your bid?
The debarment list is a central list of suppliers who are barred, or can be barred, from public contracts. It’s run by the Procurement Review Unit and published on GOV.UK, and buyers have to check it on every tender under the Act.
The Cabinet Office’s official debarment guidance explains how an entry works. Buyers check your organisation, your associated persons and your intended subcontractors.
Check the list yourself using your legal company name and company number, and those of your partners. Note which ground any entry relates to and keep a dated record, because similar trading names can cause confusion.
An entry on a mandatory ground can make a supplier an excluded supplier. An entry on a discretionary ground makes it excludable, and the buyer then decides whether to exclude it.
Entries usually last up to five years, and each one has its own end date.
Before a supplier is added, the minister must give notice and wait eight working days. This is separate from the standstill period after a contract award.
Even with a clear result, the buyer still has to assess anything you disclose in the tender itself.
How do you write a clear disclosure answer?
Build your answer around the exact wording of the question and the legal test behind it. The person reading it needs facts they can record and assess.
Start by saying which organisation or person the disclosure is about and which of the tender exclusion grounds it relates to, using the same terms as the questionnaire. Then explain what happened, with dates and the formal outcome, and be clear about what’s been established and what’s still being investigated or disputed.
Next, set out the consequences, such as a terminated contract, compensation or action by a regulator, and name the supporting documents. Finish with what you’ve changed, who took responsibility and when it came into effect, and why that makes a repeat unlikely.
Keep it proportionate. A reviewer should be able to follow the timeline without piecing it together from several attachments.
Our guidance on writing evidence-based tender responses explains how to link each part of a question to evidence. For an exclusion disclosure, that means attaching the decision or completed action record and saying what each document shows.
If the portal limits your word count, answer directly in the box and follow its instructions for attachments. Keep the full approved version on file, so whoever signs the declaration has a reliable record of what you’ve told the buyer.
How do you show what has changed?
Section 58 of the Procurement Act’s exclusion provisions lists the evidence a buyer can take into account when deciding whether a problem is likely to happen again. Procurement guidance calls this ‘self-cleaning’.
That evidence can include compensation you’ve paid, steps you’ve taken to fix the original problem, and changes to staff or management.
Explain how each change tackles the cause. If supervision failed, for example, show the new reporting lines and evidence that supervision now happens.
Training records, monitoring results and audit findings sit well alongside a new policy, because they show people are following it. Pick the evidence that matches what went wrong.
How do you explain unfinished actions?
The buyer can also take into account commitments to future steps and how long it’s been since the problem last happened.
For anything still in progress, give a named owner and a completion date. Explain what’s protecting the contract in the meantime, and keep finished work and planned work clearly separate.
Time without a repeat can help your case if you’ve carried on doing similar work. Explain that context so the buyer can see what the time shows.
If you write that lessons have been learned, follow it straight away with what changed in how you work and the evidence behind it.
What are the common disclosure mistakes?
Keep your declarations consistent
Copying last year’s answer to the tender exclusion grounds questions can carry old facts into a new declaration. Check it against your current records and the wording of this tender.
Compare your answer with your subcontractors’ declarations and attachments too. Different dates or descriptions lead to clarification questions you could have avoided.
Some relationships with the buyer’s staff may need a separate declaration. Our guide to declaring tender conflicts of interest covers how to describe the connection and how you’re managing it.
If anything changes during the tender, tell the buyer through the route it has set out, and keep a note of what changed and when you told them.
Keep eligibility separate from quality scoring
The buyer looks at each event against the tender exclusion grounds to decide whether you can take part. This part isn’t scored, so answer with facts and evidence that match the legal test.
General statements about your reputation or excellent service won’t help the buyer assess a specific, documented problem.
Before you submit, give one person ownership of the declaration and get it signed off by someone who can see the records. Our tender submission review guidance helps with that final compliance check.
Frequently asked questions
Need help with an exclusion disclosure?
A strong answer on tender exclusion grounds gives the buyer a clear timeline, names the ground and shows evidence of change. Start gathering the information early, so you’ve got time to fill any gaps before the declaration needs signing.
At Bidsmithery™, we help teams review their own submissions for clarity, evidence and compliance. Your organisation keeps ownership of the bid and its factual declarations.
If an independent review would help your next submission, you’re welcome to book a fit check call. We can talk through the support your team needs.

Meet the author
Melissa Howard knows what evaluators look for, because she’s been one. She founded Bidsmithery™ after 15 years writing, managing and scoring bids across more than 10 sectors, and in the past three years her clients have won more than £103m in contracts.
The Bidsmithery™ secret sauce is simple: your team writes the bid, and Melissa reviews it before you submit, showing you where you’re losing marks and how to fix them. She also trains teams, so every bid gets easier.
